News » Daily precautions for Roots blower of calcium carbonate

Daily precautions for Roots blower of calcium carbonate

The special roots blower for calcium carbonate is widely used in various industries. The following is a brief introduction to the matters needing attention in the daily operation of the roots blower for calcium carbonate

1. Open the vent valve before startup and shutdown of special roots blower for calcium carbonate to ensure the start and shutdown of Roots blower under no load condition. Pay attention to observe during the production process, the current should not exceed the rated current of the motor.

2. The roots blower is rinsed with water once every 12 hours. The water consumption of 40 m3 blower is 10 L and that of 60 m3 blower is increased appropriately. (flushing water, hot water is better) calcium carbonate roots blower

3. Adjust the V-belt tightness after 5-7 days operation of Roots blower. If the belt is too loose, the air volume will be insufficient, and the motor and fan are easy to be damaged).

4. The special roots blower for calcium carbonate should be replaced with new oil after running for one month, and then every three months. The oil injection amount is between the middle red dot and the upper edge of the oil indicator.   

5. The water-cooled roots blower must be equipped with circulating water, and the water temperature should not be higher than 25 degrees to ensure smooth water flow.